Barrel Blinger Assembly

How to Assemble Your Barrel Blinger Pen Turner

This user-friendly tool is designed to make rhinestoning pens smoother, faster, and more precise. Follow these clear step-by-step instructions to get started:

Required Parts:

• Handle/Base

• Door Side Clip

• Clip

• Pen Stopper

• Pen Rod

• Barrel Blinger Tray (or compatible tray like Scattered Gems or Quad Squad)

Assembly Instructions:

1. Remove all parts from the bag.

2. Attach the handle/base to the pen rod. Be sure the arrow faces the flat side.

3. Snap the first clip onto the rod with the correct orientation as shown.

4. Slide the pen barrel onto the rod.

5. Insert the pen stopper into the open end of the pen.

6. Attach the second clip to secure the pen.

7. Position the tray so the "DOOR SIDE" clip aligns with the side that has the sliding door.

8. Secure the clips into the tray, and you’re ready to bling!

How to Use the Pen Drying Stand

Follow these quick and easy steps to convert your Barrel Blinger Pen Turner into a drying stand using the included parts:

Required Parts:

• 1x Handle/Base

• 1x Pen Stopper

• 1x Pen Rod

 Additional rod and base sets are available at www.thetumbleruniverse.com

Assembly Instructions:

1. Remove the clip furthest from the handle side of the pen turner.

2. Pull the handle off the pen rod.

3. Slide the pen rod out of the remaining clip.

4. Reattach the handle to the pen rod and place it vertically on a flat surface.

Now your pen is securely standing upright, allowing for even and uninterrupted drying.